> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://helpdesk.telegramfxcopier.io/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Using The New Telegram-Native Telegram Signal Copier

# Using the TGFX Mobile Copier (Telegram Mini App)
The TGFX Mobile Copier now runs directly inside Telegram as a mini app — no separate download required. This guide walks you through launching and setting it up for the first time.

## Step 1 — Launch the Mini App from Your Portal
Log into your account at **telegramfxcopier.io/portal**. On the main dashboard you will see four cards. Click **Mobile App** — labeled "Set up and run the TGFX Cloud Copier in Telegram (beta)."
This will open the mini app inside Telegram on your device.
### Step 2 — [Sign In with Your Telegram Account](https://helpdesk.telegramfxcopier.io/en/article/step-2-logging-into-the-cloud-copier-14fsaye/)
The mini app will open to a Sign In screen. Enter your Telegram phone number including your country code (for example, +1 for the United States) and tap **Send Code**. Telegram will send a verification code to your Telegram app. Enter the code when prompted.  
> **Note:** This links the mini app to your Telegram account so it can access your signal channels. Your phone number is not stored or shared.
![](https://storage.crisp.chat/users/helpdesk/website/-/d/6/8/d/d68d8f38f8565000/screen-shot-2026-03-22-at-5502_ca5fbj.png)

## Step 3 — Confirm Your Account (Step 1 of 5)
Once signed in you will see the onboarding screen showing your Telegram username and subscription status. Confirm that your subscription shows as **Active Subscriber**. Tap **Begin Setup** to continue.
> If your subscription does not show as active, make sure you are signed into Telegram with the same phone number associated with your TelegramFX Copier account.

## Step 4 — Select Your Signal Channels (Step 2 of 5)
The app will fetch the Telegram channels you are a member of. Select the channels you want to copy signals from. You can select one or multiple channels. Tap **Next** when done.
![](https://storage.crisp.chat/users/helpdesk/website/-/d/6/8/d/d68d8f38f8565000/screen-shot-2026-03-22-at-8491_19exm52.png)

## Step 5 — Connect Your Broker (Step 3 of 5)
[Enter your MetaAPI token and Account ID to connect your MT4 or MT5 broker account](https://helpdesk.telegramfxcopier.io/en/article/step-3-connect-metaapi-to-the-copier-1rqb7b3/). These can be found in your MetaAPI dashboard at **metaapi.cloud**.
The app will automatically scan your broker's available symbols and detect any mismatches — for example if your broker uses **GOLD** instead of **XAUUSD**. Any detected differences will be mapped automatically.
> [If you do not have a MetaAPI account yet,](https://helpdesk.telegramfxcopier.io/en/article/step-1-how-to-set-up-metaapi-api-connection-1enjqyw/) visit metaapi.cloud to create one and connect your broker. 
![](https://storage.crisp.chat/users/helpdesk/website/-/d/6/8/d/d68d8f38f8565000/screen-shot-2026-03-22-at-8492_e62p3a.png)

## Step 6 — [Configure Risk Settings](https://helpdesk.telegramfxcopier.io/en/article/step-4-copier-settings-n38eng/) (Step 4 of 5)
Set your preferred lot sizing method:
* **Fixed lot** — the same lot size on every trade
* **Risk-based** — a percentage of your account balance per trade (recommended)
Enter your preferred value and tap **Next**.
![](https://storage.crisp.chat/users/helpdesk/website/-/d/6/8/d/d68d8f38f8565000/screen-shot-2026-03-22-at-8494_1qk1zb0.png)

## Step 7 — Review and Go Live (Step 5 of 5)
Review your settings — channels, broker connection, and risk configuration. Tap **Confirm** to activate your copier.

## You're Live — The Dashboard
Once setup is complete you will see the main dashboard showing:
* **Channels** — number of active signal channels
* **Broker** — connection status
* **Risk Settings** — your current configuration
* **Trade Logs** — recent copied trades
Your copier is now running on our cloud servers 24/7. You do not need to keep Telegram open or your phone on for trades to copy.
Tap **Open Full App** at any time to access the full web dashboard for advanced settings.

## Returning to the Mini App
To reopen the mini app at any time, go to your Telegram chats and find **TGFX mobile copier** in your chat list. Tap it and the app will open where you left off.

## Frequently Asked Questions
**Do I need to set this up if I already use the web dashboard?** Only if you want to use the mobile mini app. If you set up your account using the web interface, your settings will automatically transfer to the Telegram native app.
**Will my trades still copy if I close Telegram?** Yes. The copier runs on TelegramFX Copier's cloud servers, not on your device.
**What if my broker uses a different symbol name for gold?** The mini app detects this automatically when you connect your broker in Step 5.
**I see "Subscription not active" on the account screen.** Make sure the Telegram phone number you signed in with matches the one on your TelegramFX Copier account. Contact support if the issue persists.

Need help? Reach us at **support via the chat widget** on telegramfxcopier.io.